 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| M-Pulse Microwave Silicon Bipolar MMIC Cascadable Amplifier Features * Cascadable 50 Gain Block * 3dB Bandwidth: DC to 4.5 GHz * 8.0 dB Typical Gain @ 1.0 GHz MP4TD0935, MP4TD0936 Ceramic Microstrip Case Style Outlines1,2,3 Available in short lead version as MP4TD0936. 4 .085 2,15 RF OUT AND BIAS 3 .020 0,508 GND * Cost Effective Ceramic Microstrip Package * Tape and Reel Packaging Available Description M-Pulse's MP4TD0935 and MP4TD0936 are high performance silicon bipolar MMICs housed in a cost effective ceramic microstrip packages. The MP4TD0935 and MP4TD0936 are designed for use where a general purpose 50 gain block is required. Typical applications include narrow and wide band IF and RF amplifiers in industrial and military applications. The MP4TD0935 and MP4TD0936 are fabricated using a 10 GHz fT silicon bipolar technology that features gold metalization and IC passivation for increased performance and reliability. 1 * Low SWR: <1.9 from 0.1 to 3.0 GHz RF INPUT 2 GND .100 2,54 o .083 2,11 .057 1,45 .455 .030 11,54 0,76 0.1800.010 4.57 0,25 MA4TD0936 .022 0,56 TYPICAL POWER GAIN vs FREQUENCY 12 10 8 6 4 2 0 0 .1 1 F R E Q U E N C Y (G H z) 10 Id= 3 5 m A .006 .002 0,15 0,05 MA4TD0935 GAIN (dB) Notes: (unless otherwise specified) 1. Dimensions are in / mm 2. Tolerance: in .xxx = .005; mm .xx = .13 3. See last page of data sheet for short lead Micro-X Pin Configuration Pin Number 1 2&4 3 Units dB dB GHz dBm dB dBm ps V mV/C Pin Description RF Input AC/DC Ground RF Output and DC Bias Min. 7.0 7.0 Typ. 8.0 + 0.4 4.5 1.9 1.4 11.5 6.0 23.0 100 7.8 -16.0 Max. 9.0 + 0.6 8.6 - Electrical Specifications @ TA = +25C, Id = 35 mA, Z0 = 50 Symbol Parameters Test Conditions 2) Gp f = 0.1 GHz Power Gain (S21 Gain Flatness f = 0.1 to 3.0 GHz Gp f3dB 3 dB Bandwidth SWRin Input SWR f = 0.1 to 3.0 GHz SWRout Output SWR f = 0.1 to 3.0 GHz P1dB Output Power @ 1dB Gain Compression f = 1.0 GHz NF f = 1.0 GHz 50 Noise Figure IP3 Third Order Intercept Point f = 1.0 GHz tD Group Delay f = 1.0 GHz Vd Device Voltage dV/dT Device Voltage Temperature Coefficient - Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ 1 FX (408) 432-3440 Silicon Bipolar MMIC Cascadable Amplifier MP4TD0935, MP4TD0936 Absolute Maximum Ratings1 Parameter Absolute Maximum Device Current 80 mA Power Dissipation2,3 750 mW RF Input Power +20 dBm Junction Temperature 200C Storage Temperature -65C to +200C Thermal Resistance: jc = 145C/W 1. Exceeding these limits may cause permanent damage. 2. Case Temperature (Tc) = 25 C. 3. Derate at 6.9 mW/C for Tc > 91C. Typical Bias Configuration Rbias Id = Vcc - Vd Rbias Vcc > 10 V RFC (Optional) 4 C (DC Block) IN 1 MP4TD0935 MP4TD0936 C (DC Block) 3 OUT Vd = 7.8 V 2 Typical Performance Curves @ Id = 35 mA, TA = +25C (unless otherwise noted) DEVICE CURRENT vs DEVICE VOLTAGE 60 Id, DEVICE CURRENT (mA) 50 40 30 20 10 0 0 2 4 6 8 10 V d, D E V IC E V O L T A G E (V ) RETURN LOSS (dB) 0 -5 RETURN LOSS vs FREQUENCY -1 0 Inp ut -1 5 O utp ut -2 0 -2 5 0 .1 1 F R E Q U E N C Y (G H z) 10 POWER GAIN vs CURRENT 9 8 GAIN (dB) f= 0 .1 G H z POUT @ -1dB GAIN COMPRESSION vs FREQUENCY 16 14 POUT - 1dB (dBm) 12 10 8 6 4 2 0 Id=35mA Id=25mA Id=45mA 7 6 5 4 10 20 30 Id, D E V IC E C U R R E N T (m A ) 40 f= 2 .0 G H z 50 0.1 1 FREQUENCY (GHz) 10 Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ 2 FX (408) 432-3440 Silicon Bipolar MMIC Cascadable Amplifier MP4TD0935, MP4TD0936 NOISE FIGURE vs FREQUENCY 7 Id= 4 5 m A NOISE FIGURE (dB) 6 .5 Id= 3 5 m A REVERSE ISOLATION (dB) -7 -8 -9 -1 0 -1 1 -1 2 -1 3 -1 4 -1 5 0 .1 1 F R E Q U E N C Y (G H z) 10 REVERSE ISOLATION vs FREQUENCY 6 Id= 2 5 m A 5 .5 5 0 .1 1 F R E Q U E N C Y (G H z) 10 Typical Scattering Parameters Z0 = 50, TA = +25C, Id = 35 mA Frequency S11 (GHz) Mag. Angle 0.1 0.164 -166.6 0.2 0.162 -169.8 0.4 0.158 -176.5 0.6 0.153 175.9 0.8 0.148 167.9 1.0 0.144 162.1 1.5 0.131 151.8 2.0 0.116 147.0 2.5 0.104 149.7 3.0 0.106 157.1 3.5 0.127 162.0 4.0 0.164 161.4 4.5 0.212 154.1 5.0 0.266 144.6 6.0 0.365 123.0 Ordering Information Long Lead Model No. MP4TD0935 MP4TD0935T S21 Mag. 2.38 2.37 2.35 2.33 2.31 2.30 2.28 2.27 2.24 2.17 2.06 1.93 1.78 1.64 1.35 Angle 163.7 162.8 160.2 156.7 152.2 146.7 132.1 117.4 102.2 87.2 73.2 60.6 49.4 39.1 23.7 Mag. 0.214 0.214 0.215 0.216 0.218 0.220 0.227 0.236 0.248 0.259 0.269 0.276 0.280 0.281 0.275 S12 Angle 5.4 5.4 5.8 6.5 7.3 8.7 12.0 15.0 17.2 18.6 19.2 18.6 19.4 19.7 21.5 Mag 0.186 0.187 0.189 0.194 0.201 0.213 0.246 0.280 0.304 0.313 0.315 0.308 0.313 0.323 0.381 S22 Angle -158.0 -159.4 -162.3 -165.6 -169.4 -171.1 -176.1 175.4 165.5 155.3 147.3 142.6 140.2 139.7 138.6 Short Lead Model No. MP4TD0936 MP4TD0936T Package Ceramic Tape and Reel Mico-X Case Styles (Long Lead) (Short Lead) Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ 3 FX (408) 432-3440 |
Price & Availability of MP4TD0936T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |